CD0654 KG1 Forged Vile KF004 BRONZE Wheel (Left & Right side, 1 wheel per pack)

CEN KG1 FORGED VILE KF004 DIRECTIONAL WHEELS – BRONZE – CD0654

The CEN Racing CD0654 KG1 Forged Vile KF004 Wheel Set is the bronze directional-wheel variant in CEN’s Vile KF004 family. CEN catalogs CD0654 as a matched left/right directional set, so orientation matters during installation.

VERIFIED PRODUCT DATA

• Manufacturer: CEN Racing
• Part Number: CD0654
• Wheel Style: KG1 Forged Vile KF004
• Finish: Bronze
• Wheel Type: Directional
• Orientation: Left & right side
• Platform Context: CEN F-250 / DL-Series KG1 wheel family

DIRECTIONAL-WHEEL ORIENTATION

Directional wheels should be installed as a mirrored left/right pair. Before tightening hardware, compare both sides from the front of the truck and confirm the spoke sweep mirrors correctly rather than rotating the same direction on both sides.

FITMENT CONTEXT

CD0654 belongs to CEN’s KG1 Forged Vile KF004 wheel family used on F-250 applications. It should be matched by exact part number and compatible hub/lug hardware rather than by appearance alone. The F-250 KG1 system uses its own wheel-hardware architecture, including the M2 lug family used by CEN’s F-250 KG1 bullet-lug kits.

INSTALLATION CHECKLIST

• Confirm the application calls for the KG1 Vile KF004 wheel family.
• Identify the left and right wheel before installation.
• Verify the spoke sweep mirrors correctly across the vehicle.
• Inspect hub and wheel mating surfaces for burrs, debris or damage.
• Seat the wheel squarely before tightening.
• Rotate the assembly by hand and check for visible runout or wobble.
• Verify tire bead seating evenly around the wheel.
• Check steering and suspension clearance through the full operating range.
• Re-check wheel hardware after the first driving session.

RUNOUT & VIBRATION DIAGNOSIS

If a newly installed wheel appears to wobble, inspect hub seating, axle straightness, tire bead position and the wheel/hub interface before assuming the wheel itself is defective. A hub that is not fully seated can create apparent lateral runout even when the wheel is sound.

BRONZE FINISH CARE

Use mild, non-abrasive cleaning methods on the bronze finish. Remove loose grit before wiping the wheel face so trapped debris does not scratch the visible surfaces. Avoid aggressive solvents unless their compatibility with the finish is known.

WHAT CEN DOES NOT PUBLISH

CEN’s current public listing confirms the CD0654 KG1 Forged Vile KF004 bronze left/right wheel identity, but does not publish a complete specification set for wheel diameter, width, offset, backspacing, wheel weight or detailed material composition. GASHEAD RC does not infer those values from neighboring CD065x variants.

GASHEAD RC NOTE

CD0654 should be treated as a matched directional F-250 KG1 wheel set, not as two interchangeable generic wheels. Correct left/right placement and the proper KG1 hub/lug system are the key installation details.