CD0651 KG1 Forged Vile KF004 GUNMETAL Wheel (Left & Right side, 1 wheel per pack)

CEN KG1 FORGED VILE KF004 DIRECTIONAL WHEELS – GUNMETAL – CD0651

The CEN Racing CD0651 KG1 Forged Vile KF004 Wheel Set is a gunmetal directional wheel pair configured with one left-side wheel and one right-side wheel. CEN explicitly identifies CD0651 as a two-wheel directional set, so wheel orientation matters during installation.

VERIFIED PRODUCT DATA

• Manufacturer: CEN Racing
• Part Number: CD0651
• Wheel Style: KG1 Forged Vile KF004
• Finish: Gunmetal
• Wheel Type: Directional
• Quantity: 2 wheels total
• Orientation: 1 left-side wheel + 1 right-side wheel

DIRECTIONAL-WHEEL ORIENTATION

Directional wheels are not interchangeable side-to-side if the intended spoke direction is to be preserved. Install the left wheel on the left side and the right wheel on the right side so the spoke sweep matches correctly across the vehicle.

Before tightening hardware, compare both wheels visually from the front of the truck. The spoke pattern should mirror from left to right rather than rotate the same way on both sides.

WHAT'S INCLUDED

• 1x Left-side KG1 Forged Vile KF004 wheel
• 1x Right-side KG1 Forged Vile KF004 wheel
• Associated mounting hardware/hub components as pictured with the manufacturer/authorized-retailer package

CEN's product page confirms the two-wheel left/right directional configuration. Because the current manufacturer text does not publish a detailed hardware inventory, GASHEAD RC does not invent screw counts or hub dimensions beyond what is visibly and reliably supplied with the set.

HUB & FITMENT CONTEXT

Specialist CEN parts listings identify CD0622 as the wheel hub used for the KG1 Vile KF004 family. When installing CD0651, confirm the vehicle is using the correct CEN hub architecture for this wheel style rather than assuming compatibility with unrelated KG1 or American Force hub systems.

INSTALLATION CHECKLIST

• Confirm the application uses the KG1 Vile KF004 wheel family.
• Identify the left and right wheel before installation.
• Verify the directional spoke sweep mirrors correctly across the vehicle.
• Inspect the wheel-hub interface for debris, burrs or damaged seating surfaces.
• Seat the wheel squarely before tightening.
• Rotate the wheel by hand and check for visible runout or wobble.
• Verify tire bead seating evenly around the rim.
• Check suspension and steering clearance through the full operating range.
• Re-check wheel hardware after the first driving session.

RUNOUT & VIBRATION DIAGNOSIS

If the wheel appears to wobble after installation, inspect the hub seating, axle straightness, tire bead position and mating surfaces before assuming the wheel itself is defective. A hub that is not fully seated can create apparent wheel runout and vibration.

DIRECTIONAL SETUP MISTAKES TO AVOID

• Swapping left and right: changes the intended visual direction of the spoke pattern.
• Mixing incompatible hubs: can alter wheel position and seating.
• Forcing installation: can damage the hub interface or create eccentric seating.
• Ignoring bead seating: can make a correctly mounted wheel appear out of round.

FINISH CARE

Use mild, non-abrasive cleaning methods on the gunmetal finish. Remove loose dust and grit before wiping the wheel face so abrasive debris does not scratch visible surfaces.

WHAT CEN DOES NOT PUBLISH

CEN's current CD0651 listing confirms the gunmetal finish, KG1 Forged Vile KF004 design and two-wheel directional left/right configuration, but does not publish wheel diameter, width, offset, backspacing, wheel weight or detailed material specification. GASHEAD RC does not infer those values from other KG1 wheel variants.

GASHEAD RC NOTE

The most important installation detail on CD0651 is orientation. Treat this as a matched directional pair—not two identical interchangeable wheels. Correct left/right placement preserves the intended KG1 Vile KF004 appearance and avoids a mismatched spoke direction across the truck.