{"product_id":"cq0504-wheel-and-tire-glued-22-grey-fiat-suzuki-jimny","title":"CQ0504 Wheel And Tire Glued 2.2\" (Grey) Fiat \/ Suzuki Jimny","description":"\u003ch2\u003eCEN CQ0504 GLUED WHEEL \u0026amp; TIRE – GREY – 2.2-INCH Q-SERIES\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eCEN Racing CQ0504 Wheel \u0026amp; Tire Glued (Grey)\u003c\/strong\u003e is a factory-assembled wheel-and-tire combo for compatible CEN Q-Series applications. The tire is supplied already mounted to the grey wheel, eliminating the separate bead-prep and gluing step required with loose wheel\/tire components.\u003c\/p\u003e\u003ch3\u003eVERIFIED PRODUCT DATA\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e CEN Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e CQ0504\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Pre-glued wheel \u0026amp; tire assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Color:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wheel Class:\u003c\/strong\u003e 2.2-inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 glued wheel\/tire assembly per retail unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 4717866105041\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform Context:\u003c\/strong\u003e CEN Q-Series; cataloged for Fiat \/ Suzuki Jimny applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFACTORY-GLUED ADVANTAGE\u003c\/h3\u003e\u003cp\u003eA pre-glued assembly removes one of the most failure-prone setup steps in RC tire preparation. Correct bead seating and adhesive coverage matter because uneven seating can create radial hop, vibration or local bead separation under load. With CQ0504, the wheel and tire are supplied as an assembled service unit.\u003c\/p\u003e\u003ch3\u003eFITMENT\u003c\/h3\u003e\u003cp\u003eCQ0504 should be matched by exact CEN part number and intended vehicle application rather than by appearance alone. CEN catalogs multiple Q\/MT-Series wheels and tires with different widths and configurations, so a similar-looking 2.2-inch wheel does not automatically guarantee equivalent track width, bead geometry or body\/suspension clearance.\u003c\/p\u003e\u003ch3\u003eINSTALLATION CHECKLIST\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConfirm the vehicle parts list calls for CQ0504 or an explicitly compatible assembly.\u003c\/li\u003e\n\u003cli\u003eInspect the glued bead around the full circumference before installation.\u003c\/li\u003e\n\u003cli\u003eCheck the wheel mounting interface and axle hardware for debris or damage.\u003c\/li\u003e\n\u003cli\u003eSeat the wheel squarely on the hub\/hex interface.\u003c\/li\u003e\n\u003cli\u003eRotate the assembly by hand and inspect for lateral wobble or radial hop.\u003c\/li\u003e\n\u003cli\u003eCheck steering clearance at full left and right lock.\u003c\/li\u003e\n\u003cli\u003eCycle suspension travel and verify the tire does not contact chassis or body components.\u003c\/li\u003e\n\u003cli\u003eRecheck wheel-retaining hardware after the first driving session.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRUNOUT \u0026amp; VIBRATION DIAGNOSIS\u003c\/h3\u003e\u003cp\u003eIf the assembly appears to wobble, isolate the cause before replacing the tire. Check hub seating, axle straightness, wheel interface, bead condition and tire deformation. A perfectly usable tire can appear out of round if the wheel is not seated correctly on the vehicle.\u003c\/p\u003e\u003ch3\u003eGLUED-BEAD INSPECTION\u003c\/h3\u003e\u003cp\u003eInspect the bead periodically, especially after impacts or high-load running. A localized bead gap can allow the tire to lift from the rim and create imbalance. Do not pull aggressively on the tire sidewall during inspection; visually check the bond around both sides of the wheel.\u003c\/p\u003e\u003ch3\u003eTIRE CARE\u003c\/h3\u003e\u003cp\u003eUse mild soap and water for routine cleaning and avoid aggressive solvents that may attack the rubber or adhesive bond. Remove trapped debris before storage and avoid prolonged heat or direct sunlight, which can accelerate rubber aging.\u003c\/p\u003e\u003ch3\u003eWHAT CEN DOES NOT PUBLISH\u003c\/h3\u003e\u003cp\u003eCEN confirms CQ0504 as the grey glued wheel\/tire assembly, but the current catalog does not publish a complete specification set for actual tire outside diameter, mounted width, rubber compound, Shore hardness, foam\/insert specification, wheel offset, backspacing or complete assembly weight. GASHEAD RC does not infer those values from neighboring CQ050x or CQ060x parts.\u003c\/p\u003e\u003ch3\u003eGASHEAD RC NOTE\u003c\/h3\u003e\u003cp\u003eCQ0504 is best treated as a complete replacement assembly rather than a generic 2.2-inch tire. Matching the exact part number protects steering clearance, wheel position and the intended CEN Q-Series setup while also giving you a ready-to-install factory-glued unit.\u003c\/p\u003e","brand":"CEN Racing","offers":[{"title":"Default","offer_id":48361990684724,"sku":"dif1789726994267","price":13.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/0180\/3316\/files\/cq0504-wheel-and-tire-glued-22-grey-fiat-suzuki-jimny_1.jpg?v=1789726998","url":"https:\/\/woodbuttonwarmclad.shop\/products\/cq0504-wheel-and-tire-glued-22-grey-fiat-suzuki-jimny","provider":"My Store","version":"1.0","type":"link"}